ACP Motorsports Avatar
Tuner Shop

ACP Motorsports

Glen burnie , MD
107 Followers
ACP Motorsports 50 days ago

Here at ACP Motorsports we take on just about anything! One of our regular clients James brought in a seat box from a early Farmall H tractor that was rusted, full of holes and had seen better days. He wanted the two rotted edges cut out and replaced with new good material. The old rusted steel was cut out and new patches were made, welded in, smoothed and new holes were drilled. The paint work will be performed by

ACP Motorsports 52 days ago

With all this cold weather in the DELMARVA area try not to catch a case of the winter blues! Warmer weather and car shows will be back soon but until then here's some highlight throwbacks to the CANCER SUCKS charity car show that ACP Motorsports covered. #ACP #ACPMotorsports #winterblues #carshow #summer #cancersucks #chairty #chairtyevent #classic #amercianmuscle #musclecars #GTO #judge #nova #montecarlo #cobra #wedophoto #shiny #sexy #events

ACP Motorsports 53 days ago

Remember with 2018 here ACP Motorsports also does professional automotive photography for Owners, Shops, Dealers, events and more! Here's a small sample of a photoshoot we did for a dealership in PA. Feel free to Email us at ACPMotorsports@gmail.com or contact us through chat! #classic #vintage #amercianmuscle #ACPMotorsports #ACP #prophoto #photography #dealership #international #chevy #nash #wedoitall

ACP Motorsports 67 days ago

1978-1987 Reclaimed GM upper control arm that have been inspected for damage, cracks & stressed areas and approved for usage. These are stock upper control arms that can be used as a factory replacement, they also conform to street stock & hobby stock factory suspension rules, and can also be used in drag racing classes that require stock front suspension. These are sold without new ball joints or control arm bushings. These arms retail at speedway motors under

ACP Motorsports 67 days ago

1979 and up Reclaimed GM front spindles that have been stripped, inspected for damage, cracks & fatigue and have been approved for usage. The spindles are OEM factory spindles that can be used as a direct replacement for a street vehicle. They will also conform to street/hobby stock, modified dirt track rules, street stock, Xtreme stock, IMCA dirt track classes, and Drag racing classes requiring stock front suspension/spindles. These spindles retail at speedway motors for $119.98 ea PN91034301 ours

ACP Motorsports 67 days ago

These are Reclaimed Long Slot Small Block Chevy 1.5:1 steel OEM style Flat Tappet Rocker Arms made by Speedway motors Part# 28711801. They can be used with standard lift or high lift camshafts in budget build engines or race classes that have restricted valve train rules. These rocker arms have been removed, cleaned and inspected for damage and wear and have been approved for use. They were ran for one season in a street stock dirt track race engine

ACP Motorsports 67 days ago

This is a Reclaimed Flex-A-Lite stainless steel semi-flex fan rated up to 10,000 RPM. The fan has been inspected for damage and wear and approved for use. This is only the fan, no bolts, spacers or adaptors included. Flex-A-Lite Stainless 10,000 RPM racing fans retail new for $60 +S&H here at ACP Motorsports we sell ours for $40.00 +S&H or free pick up. Feel free to inquire VIA chat or email us at ACPMotorsports@gmail.com  #Forsale #ACPMotorsports #ACP #Reclaimed #reclaimedparts

ACP Motorsports 67 days ago

This is a Reclaimed Chrome Starter cover for a 1974-1981 Kawasaki KZ400 & KZ440 motorcycles. This starter cover is in great shape with no major damage to it. this part is selling for $20.00 + S&H or in store pick up. #forsale #ACPMotorsports #ACP #reclaimed #reclaimedparts #KZ400 #KZ440 #startercover #cover #chrome #buyme #motorcycle #kawasaki

Part for sale

$20

Glen Burnie, MD

ACP Motorsports 67 days ago

This is a Reclaimed chrome starter cover for a 1974-1981 Kawasaki KZ400/KZ440 motorcycle engine. The starter cover is in great shape with no major damage. Selling for $20.00, this item can be shipped via USPS flat rate mailing services at the buyer's expense. #forsale #Kawasaki #KZ400 #KZ440 #startercover #chrome #reclaimed #reclaimedparts #ACPMotorsports #ACP #buyit

ACP Motorsports 67 days ago

Good new! The progress on the upcoming line of 67-72" chevy C10 parts line is coming along smoothly! Some parts we will be introducing include Performance rear track bars, aluminum radiator mounts, frame boxing kits, chassis cross members, exhaust parts, shave panels and much much more!! #ACPMotorsports #ACP #partsline #parts #soontocome #C10 #truck #performance #67 #68 #69 #70 #71 #72 #update

ACP Motorsports 67 days ago

A quick modification and installation of a set of new Cast aluminum Bully dog step bars on a dodge pick up. We added a set of additional mounting holes to the step up bars and upgraded the mounting hardware to larger stainless steel bolts/nuts/washers to help prevent corrosion and to add a bit more strength. The truck was also inspected and will be back for future suspension work to help repair some wear and tear on the truck. #ACPMotorsports

ACP Motorsports 124 days ago

ACP Motorsports is currently R&Ding a new line of parts for the 67-72 chevy C10 truck series. This part line will be of all new parts not reclaimed parts. The parts will range from performance suspension parts, frame stiffening parts, mounts, Exhaust components, patch panels and much more! Keep an eye out for our upcoming selection!

ACP Motorsports 124 days ago

A frame boxing a custom 4 link rear suspension job that we did earlier this year, This was done by ACP for another shop at their location, they were behind on their project load so we stepped in and took care of the frame boxing, rewelding in the stock rear crossmember that use to be riveted in, stripping the donor rear end, welding all of the 4 link components, C- notching the frame, the driveshaft loop and the new

ACP Motorsports 124 days ago

These steel fenders were brought to us to be repaired stripped, painted and undercoated. The fenders were stripped down bare, then they were body worked with a hammer and dolly to remove the major creases. after that it was shot with a high build primer, followed by a sealer, the silver and finally a clear coat. the underside of the fenders were stripped and coated with a rubberized undercoating to prevent rust.  

ACP Motorsports 124 days ago

Congratulations Steve on your new donor frame!! Steve came to us looking for a donor monte carlo frame to use to cut replacement sections out of to repair his monte carlo metric chassis street stock car over the winter. Hope you Enjoy!! 

ACP Motorsports 160 days ago

For Sale 1979 and up Reclaimed GM front spindles that have been stripped, inspected for damage, cracks and stresses and has been approved for usage. The spindles are OEM factory spindles and will conform to street/hobby stock and modified dirt track rules or can be used as a direct replacement for a street vehicle or used on street stock/Xtreme stock/IMCA dirt track classes. These spindles retail at speedway motors for $119.98 ea PN91034301 ours sell for $75.00 each and

ACP Motorsports 160 days ago

Progress is being made once again on the 1971 Chevy C10 shop truck Owned by Joshua Dicus founder of ACP Motorsports. Currently new parts have been pulled out of storage and body work has begun. The doors are being removed, disassembled, stripped to bare metal and then the rust damage will be assessed and patch panels will be fitted and welded. The doors will get new lower inner and outer skins, all new weather stripping, new window tracks, new

ACP Motorsports 160 days ago

We had a customer come in this week with a cheap Ebay aluminum intercooler that he had on his Dodge Neon turbo that decided to let loose right at a weld seam while under 23PSI of boost. It split the intercooler down the weld seam for about 10-11". We cleaned the intercooler up, tapped the plate back into its proper position and ran a TIG aluminum bead down the blown out seam. the customer did not wish to have

ACP Motorsports 172 days ago

This is a Reclaimed Flex-A-Lite stainless steel semi-flex fan rated up to 10,000 RPM. The fan has been inspected for damage and wear and approved for use. This is only the fan, no bolts, spacers or adaptors included. Flex-A-Lite Stainless 10,000 RPM racing fans retail new for $60 +S&H here at ACP Motorsports we sell ours for $40 +S&H or free pick up. Feel free to inquire VIA chat or email us at ACPMotorsports@gmail.com 

ACP Motorsports 172 days ago

These are Chevy/GMC 15" 5 lug steel wheels. They have been inspected for damage, spun to ensure roundness, checked for leaks up to 45 PSI. The wheels were then cleaned, the insides and backs have been painted with a high temp Epoxy coating that's rated for 400 degrees and will prevent internal corrosion and rust of the wheel. The face of the wheel was painted with a high temp aluminum paint that is rated for 500 degrees. At the

[]ACP Motorsports

one sold so far, congrats to the new owner, still Two more up for grabs!!

ACP Motorsports 172 days ago

Here at ACP Motorsports we sell a lot of Reclaimed parts for dirt track racers, daily drivers, budget restoration projects and budget performance builds. A Reclaimed part is generally a part that was produced by an automotive manufacturer or an aftermarket company that has been in service/use before. These parts are stripped down bare, inspected for signs of damage, wear & tear, fatigue, or anything else that would prevent it from performing its duty properly. The parts are then

ACP Motorsports 172 days ago

This is a GM Cast Iron Bellhousing that we have cleaned, inspected for damage/cracks/signs of cracking and then coated in a natural cast iron high temp coating that can withstand temperatures up to 750 degrees. This Bellhousing is casted as a GM7  A 27 0 3925505 Which means it's a 68-72, cast iron 11", 10.5" clutch, side mount, originally for Chevy trucks, compatible with all 68-72 engines. These bellhousings sell for $80-100 on average, here at ACP Motorsports we

[]ACP Motorsports

SOLD!

ACP Motorsports 222 days ago

The Chevy Nova II Pro Street car was sold and loaded up by the transporter the day we had finished the exhaust system,the car had sold and was being shipped to the buyer. 

ACP Motorsports 222 days ago

Several Months ago ACP Motorsports traveled to a private shop in frederick to fabricate a custom exhaust system for a chevy Nova II Pro Street car that was about to be sold. The exhaust was built out of mandrel bent 3" exhaust tubing, the system has slip joints connecting it to the header collectors, the rest of the system is MIG welded and per the customer's request sports a set of staggered inlet/outlet thrush mufflers. This is the first

ACP Motorsports 222 days ago

For Sale 1979 and up Reclaimed GM front spindles that have been stripped, inspected for damage, cracks and stresses and has been approved for usage. The spindles are OEM factory spindles and will conform to street/hobby stock and modified dirt track rules or can be used as a direct replacement for a street vehicle. These spindles retail at speedway motors for $119.98 ea PN91034301 ours sell for $75.00 each and we currently only have three left in stock. Payment

ACP Motorsports 222 days ago

For sale is a 1978-1987 Reclaimed GM upper control arm that has been inspected for damage, cracks and stressed areas and approved for usage. These are stock upper control arms and can be used on street or track vehicles and will conform to street/hobby stock factory suspension rules. These are sold without new ball joints or control arm bushings. These arms retail at speedway motors under PN91034357 for $89.98 ours sell for $50.00, upper ball joints can be included

ACP Motorsports is a small up & coming speed & fabrication shop That is experienced in a wide variety of vehicles and racing classes. We offer Welding services, Fabrication services, Exhaust systems, Audio systems, Custom parts, Remanned parts, Engine services, and much more! Feel free to Contact us VIA our email address for any questions!
xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">Asset 4Asset 3