Jimbo's Channel Avatar

Jimbo's Channel

Jimbo's Channel6 days ago

Post by Jimbo's Channel...

[]Craig Crall

Honestly, as a long time engine builder I would steer away from the Gen II engine to get FAR away from the Opti-Spark and it's atrocious reliability issues. If you're dead set on using your LT, then aftermarket heads are going to be your best bet, don't waste time porting the stock castings, as there are numerous offerings out there, which will easily out-perform the stock castings, even when well ported, in many cases for less $$.than you'd spend on port work, new seats, valves and re-surfacing.

Jimbo's Channel19 days ago

Post by Jimbo's Channel...

Jimbo's Channel20 days ago

Post by Jimbo's Channel...

Jimbo's Channel21 days ago

Post by Jimbo's Channel...

Jimbo's Channel28 days ago

Post by Jimbo's Channel...

Jimbo's Channel30 days ago

Post by Jimbo's Channel...

Jimbo's Channel57 days ago

Post by Jimbo's Channel...

Jimbo's Channel67 days ago

Post by Jimbo's Channel...

Jimbo's Channel171 days ago

Post by Jimbo's Channel...

Jimbo's Channel177 days ago

Post by Jimbo's Channel...

Jimbo's Channel189 days ago

Post by Jimbo's Channel...

Jimbo's Channel189 days ago

Post by Jimbo's Channel...

Jimbo's Channel199 days ago

Post by Jimbo's Channel...

[]Jessica Pomerleau

Wish I could come, but a little far from home. Seems like a great cause 😊

Jimbo's Channel204 days ago

Post by Jimbo's Channel...

Jimbo's Channel216 days ago

Post by Jimbo's Channel...

Jimbo's Channel216 days ago

Post by Jimbo's Channel...

Jimbo's Channel224 days ago

Post by Jimbo's Channel...

Jimbo's Channel224 days ago

Post by Jimbo's Channel...

Jimbo's Channel225 days ago

Post by Jimbo's Channel...

Jimbo's Channel225 days ago

Post by Jimbo's Channel...

Jimbo's Channel233 days ago

Post by Jimbo's Channel...

Jimbo's Channel233 days ago

Post by Jimbo's Channel...

Jimbo's Channel233 days ago

Post by Jimbo's Channel...

Jimbo's Channel235 days ago

Post by Jimbo's Channel...

Jimbo's Channel235 days ago

Post by Jimbo's Channel...

xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">Asset 4Asset 3Check marlCreated using Figma