close promo banner icon

cold-air-intakes

AirAid 451-265 - AIRAID MXP Series Cold Air Intake System

rating-star review rating-star review 1rating-star review 2rating-star review 3rating-star review 4

$341.27

$426.59

You save: $85.32 (20%) off MSRP

stock messaging In StockIn Stock
Ships within 24 hours
Check to see if this fits your vehicle

This part fits

  1. 2014 Ford Mustang Base 3.7L V6 cid:227 cc:3726
  2. 2013 Ford Mustang Base 3.7L V6 cid:227 cc:3726
  3. 2012 Ford Mustang Base 3.7L V6 cid:227 cc:3726
  4. 2011 Ford Mustang Base 3.7L V6 cid:227 cc:3726
Authorized Dealer

About this product

Part #: 451-265

The CAI for the V6 Ford Mustang is the perfect first mod to increasing power by improving airflow. The much larger cone filter will drastically increase intake surface area and along with the larger intake tube will create an air raid effect increasing horsepower by as much as 10hp across the entire rev range. In addition, this CAI comes with a fully enclosed box that funnels cold air from the outside and prevents warm air (less dense air = less power) from the engine to enter the intake. The filter is a high quality dry filter that does not require oiling. Lesser quality filters typically require oiling and that oil can make it's way to the Mass Air Flow sensor which will then degrade performance. CARB Approved. The AIRAID MXP Series Cold Air Intake System for the 2011-2015 Ford Mustang V6 is approved for use by the California Air Resources Board. As such, it is approved for sale in California and will pass any and all smog testing requirements. CARB Certification #: D-609-15. The AIRAID MXP Series represents the ultimate in Cold Air Induction systems. Designed for high-performance gas and diesel applications, the MXP Intakes start with a new one piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Then AIRAID® adds a new air intake tube constructed of cross-linked, high-density Polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. They also frequently have a built-in velocity stack, which further promotes airflow. What this all means is a simple-to-install system that was designed using extremely sophisticated technology to increase airflow while maintaining proper air / fuel ratios, therefore eliminating the need for re-calibration once installation is complete. Just bolt it on and go! Like any other AIRAID® Intake System, the MXP includes an AIRAID® Premium Filter that is sized to maximize power and efficiency.

More Details

Air Filter Outlet ShapeRound
Clamp MaterialStainless Steel
Clamp StyleWorm Gear
Clamps Included4
Couplers Included2
Filter ColorRed
Filter MaterialNon-woven Synthetic
Intake Pipe Color / FinishBlack
Intake Pipe MaterialHigh-Density Polyethylene
Mounting Hardware IncludedYes
Product Box Height15.60 in. (396mm)
Product Box Length19.90 in. (505mm)
Replacement Filter701-458
TitleAIRAID AIR-451-265 Performance Air Intake System
Weight10.2000 lbs.
Additional Documents
  1. Installation Instructionspdf

See what our community says about airaid products

product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Better intake, previous experience with airaid was good
What were you trying to accomplish by adding this product?
More power, better throttle response
Was it easy install? Any installation tips that will help others?
Yes, very quick. 30 mins
Once you’ve had a chance to use the product, did it meet your expectations?
Works great
View on Casey's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
The quality and reviews Curious to hear The Sound of Power... the “Whistle” Means Its Working!
What were you trying to accomplish by adding this product?
Improves Throttle Response and Low End Torque Increases Fuel Economy
Was it easy install? Any installation tips that will help others?
Only took 15min to install you may need different bolts if you have an aftermarket throttle body
Once you’ve had a chance to use the product, did it meet your expectations?
Yes, immediately noticed the increase in throttle response and torque!
Any additional comments?
The Sound of Power... the “Whistle” Means Its Working!🤪
View on Darvin's build
Nathan Gleason

55

Nathan Gleason
2006 Ford Mustang
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Performance.
What were you trying to accomplish by adding this product?
More horsepower. Tune for higher air to fuel ratio.
Was it easy install? Any installation tips that will help others?
Easy peezy.
Once you’ve had a chance to use the product, did it meet your expectations?
Definitely.
View on Nathan's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
convenience and quality
What were you trying to accomplish by adding this product?
I wanted some more intake noise that wasn't too aggressive but noticeable.
Was it easy install? Any installation tips that will help others?
easy install, make sure to read directions-some years have different vacuum lines blocked off
Once you’ve had a chance to use the product, did it meet your expectations?
Spendy for what it is but fits great
View on Nathan's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
The design
What were you trying to accomplish by adding this product?
Improved appearance
Was it easy install? Any installation tips that will help others?
Easy to install.
Once you’ve had a chance to use the product, did it meet your expectations?
Working as expected.
View on Joshua's build
California prop 65 warningWARNING: Cancer and Reproductive Harm www.p65warnings.cs.gov

*Some manufacturer restrictions apply.

About AirAid

All AIRAID Premium Filters are produced in-house using only the finest materials available and highly specialized manufacturing equipment to ensure a level of quality control no other filter company can match. This is just one of many reasons why all of AIRAID's filters are backed by our "No Hassle" Lifetime Warranty. All of AIRAID's product lines are proudly manufactured in the USA.

shipping-worldwide from warehouse

we ship worldwide!

Based in California with 3 warehouses across the country, we’re sending out shipments everyday of the week, even Saturdays. Because your next mod shouldn’t have to wait.

+ FREE GROUND SHIPPING ON U.S. ORDERS OVER $99
Globe international shipping icon
Have a question? Ask an Expert!

Finding the best parts can be tricky

- but not to worry! Our team of experienced American Muscle, JDM, Euro, and off-road tuners are ready to answer your questions (as long as we’re not in the garage wrenching on our own builds).

chat-iconLive Chat
Ask our expert tuners anything!
call_iconCall Us
1 (800) 959-4304
Decorative testimonal quote icon

What do you get when you mix Facebook, Amazon, and your favorite online car forum? You get Wheelwell.com.

undefined supporting their testimonial

Hot Rod Magazine

Decorative testimonal quote icon

Wheelwell helps you organize all your stuff for your car, I’ve loaded all my cars on Wheelwell and you can see all the parts I’ve put in them and that may help you make a decision with your own build.

Matt Farah supporting their testimonial

Matt Farah

The Smoking Tire / The Drive

Decorative testimonal quote icon

This is an awesome new site where enthusiasts can get together and figure out what products work best on their ride.

undefined supporting their testimonial

The Truck Show Podcast