frame-components

BMR Suspension CB006R - Chassis Frame Reinforcement

rating-star review rating-star review 1rating-star review 2rating-star review 3rating-star review 4

Unavailable

This product is currently unavailable.

Check to see if this fits your vehicle

TOP MEMBER BUILDS RUNNING THIS MOD

BMR Suspension CB006R - Chassis Frame Reinforcement

This part fits

  1. 2016 Ford Mustang GT Premium
  2. 2016 Ford Mustang Base
  3. 2016 Ford Mustang EcoBoost
  4. 2016 Ford Mustang EcoBoost Premium
  5. 2016 Ford Mustang GT
  6. 2015 Ford Mustang EcoBoost
  7. 2015 Ford Mustang Base
  8. 2015 Ford Mustang EcoBoost Premium
  9. 2015 Ford Mustang GT
  10. 2015 Ford Mustang GT 50 Years Limited Edition
  11. 2015 Ford Mustang GT Premium
  12. show all...
Authorized Dealer

About this product

Part #: CB006R

Increase steering stability, K-member rigidity, and reduce front alignment changes on your S550 Mustang with a front Chassis Brace from BMR Suspension. The factory K-member and lower control arm mount can deflect under hard braking and extreme lateral loading. Built from a mixture of heavy-duty 2 1/4-inch DOM steel and 1- by 1.5-inch rectangular tubing, BMR's CB006 Chassis Brace is designed to support and stiffen the factory S550 K-member and front suspension. This increases steering feel and stability during aggressive braking and maneuvering. BMR's CB006's front Chassis Brace ties the front lower control mounts to the rear legs of the K-member. The design reinforces every major area of the K-member effectively reducing deflection when fore, aft, and lateral loads are applied to the chassis. BMR Suspension designed the CB006 front Chassis Brace for street performance, drag race, and handling application. This 100% bolt-on kit use existing boltholes and supplied hardware, allowing for easy installation with simple hand tools. Once installed, the Chassis Brace minimizes lower control arm mounts and K-member deflection with no change in NVH. This brace reduces deflection, increasing steering feel and stability on both the street and track. This brace is designed to fit with both stock and aftermarket headers and exhaust systems. BMR Suspension's CB006 front Chassis Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.! ***NOTE: The Brace does not fit V6 or GT350 models. It also does not fit 2015+ Mustang V8 applications with Kooks Long Tube Headers.***

More Details

Coated FinishRed Powdercoat
TitleBMR Suspension CB006R - Chassis Brace, Front Subframe, 4-point - 2015-2017 Mustang

See what our community says about bmr-suspension products

product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Needed for lowering car properly .
Is this your first time buying from this brand? Did you consider other brands?
yes
Was it easy to install? Any installation tips that will help others?
it was okay to install hard to get up into the spot to install it.
Once you've had a chance to use the product, did it meet your expectations?
good price for product
View on Gabby's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Little bit better handling.
Is this your first time buying from this brand? Did you consider other brands?
Not really, BMR has a great reputation for quality so I just went with them. Got the part on sale too so it was cheap.
View on Will's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Had several BMR parts, all satisfying.
Was it easy to install? Any installation tips that will help others?
Just need a spring compressor and the correct tools. Not too difficult for the average wrencher. Don't forget to reuse the original springs isolators, or another pair.
Once you've had a chance to use the product, did it meet your expectations?
Incredible when paired with Bilstein shocks/struts. Flat, neutral ride. I never realized how uneven my street is until now. Luckily all the fun roads are nice and smooth. The car sits at a really nice height. The rear has more gap normally, so if you need it tighter in the back consider eibach sportlines or H&Rs.
Any additional comments?
Consider an adjustable UCA when lowering. Most people cheap out and don't talk about it, but your pinion angle is gonna be off. Even with the two piece drive shaft.
View on Bryan's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
S60 came with gm rubber bushings and I broke them so upgraded to these
Is this your first time buying from this brand? Did you consider other brands?
No, looked into are power
Was it easy to install? Any installation tips that will help others?
Professional install
Once you've had a chance to use the product, did it meet your expectations?
Hear the rear end noise more
View on Blake's build
Brent Waggoner

772

Brent Waggoner
2016 Ford Mustang
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
BMR has some of the best and most reliable parts on the market
Is this your first time buying from this brand? Did you consider other brands?
No, will continue to buy BMR religiously
View on Brent's build
California prop 65 warningWARNING: Cancer and Reproductive Harm www.p65warnings.cs.gov

*Some manufacturer restrictions apply.

About BMR Suspension

Whether you are interested in street performance, hardcore drag racing, or handling applications, BMR Suspension has the products that you need. Proudly made in the U.S.A. in a manufacturing facility near Tampa, Florida, American workers cut, bend, notch, drill, and mill components from American-made DOM and chrome-moly steel. Then, every product is fixture-welded to maintain consistent quality. Workers bead-blast parts and then powdercoat them using BMR's in-house powdercoating line. Finished parts are then assembled and packaged in the assembly department. By manufacturing every product in house, BMR can control the quality at every stage of the manufacturing process.

shipping-worldwide from warehouse

we ship worldwide!

Based in California with 3 warehouses across the country, we’re sending out shipments everyday of the week, even Saturdays. Because your next mod shouldn’t have to wait.

+ FREE GROUND SHIPPING ON U.S. ORDERS OVER $99
Globe international shipping icon
Have a question? Ask an Expert!

Finding the best parts can be tricky

- but not to worry! Our team of experienced American Muscle, JDM, Euro, and off-road tuners are ready to answer your questions (as long as we’re not in the garage wrenching on our own builds).

Decorative testimonal quote icon

What do you get when you mix Facebook, Amazon, and your favorite online car forum? You get Wheelwell.com.

undefined supporting their testimonial

Hot Rod Magazine

Decorative testimonal quote icon

Wheelwell helps you organize all your stuff for your car, I’ve loaded all my cars on Wheelwell and you can see all the parts I’ve put in them and that may help you make a decision with your own build.

Matt Farah supporting their testimonial

Matt Farah

The Smoking Tire / The Drive

Decorative testimonal quote icon

This is an awesome new site where enthusiasts can get together and figure out what products work best on their ride.

undefined supporting their testimonial

The Truck Show Podcast