Launching harder, reducing wheel hop, and repositioning the instant center on your S197 Mustang is easy with lower control arm relocation brackets from BMR Suspension. BMR's bolt-on relocation brackets for S197 Mustangs are the ultimate in strength and adjustability. The stock lower control arm mounting location can give you insufficient lower control arm angle on lowered vehicles. BMR's control arm relocation brackets allow you to correct the lower control arm angle, correcting the rear suspension geometry and allowing you to add anti-squat for increased traction. Manufactured from heavy-duty 3/16- and 1/4-inch laser cut, CNC-formed steel plate, the CAB005 are designed to bolt in place, making installation simple and easy. The stock control arm mounting position is fine for stock height vehicles, but once you lower your car, the control arms change and need to be corrected. The CAB005s allow you lower the lower control arms' rear mounting position by as much as 3 inches, correcting the control arm angles. This also allows you to make instant center changes for race applications. BMR Suspension designed the CAB005 to work well in street performance, drag race, and road race applications. It is engineering to bolt on and stand up to extremely high horsepower and torque levels, as well as the hardest drag strip launches without moving on the rearend housing. When performance is a must, rely on BMR Suspension! BMR Suspension's CAB005 bolt-on lower control arm relocation brackets come uncoated. Installation time is about 2-3 hours. Proudly made in the U.S.A. The BMR Control Arm Relocation Brackets correct the vehicles instantaneous center, improving drag strip traction and handling traction during corner exiting. BMR can proudly claim that these Relocation Brackets are the only brackets in the industry that have been 1.1 sixty-foot times, BOLTED-ON! We also have many 1.2, 1.3 and 1.4 60-foot combinations running these same pieces.
|Coated Finish||Red Powdercoat|
|Title||BMR Suspension CAB005R - Control Arm Relocation Brackets, Bolt-on - 2005-2014 Ford Mustang|
Whether you are interested in street performance, hardcore drag racing, or handling applications, BMR Suspension has the products that you need. Proudly made in the U.S.A. in a manufacturing facility near Tampa, Florida, American workers cut, bend, notch, drill, and mill components from American-made DOM and chrome-moly steel. Then, every product is fixture-welded to maintain consistent quality. Workers bead-blast parts and then powdercoat them using BMR's in-house powdercoating line. Finished parts are then assembled and packaged in the assembly department. By manufacturing every product in house, BMR can control the quality at every stage of the manufacturing process.
Enhanced suspension products like shocks and springs play a critical role in creating a balanced high performance vehicle. Whether you want to attack the apex or mob the Moab, we have you covered with everything from coilover upgrades to high-rise lift kits. From faster cornering to more balanced stopping and acceleration, upgrading your stock suspension components will bring improvements you can feel for any street, track, or off-road build.
Based in California with 3 warehouses across the country, we’re sending out shipments everyday of the week, even Saturdays. Because your next mod shouldn’t have to wait.