May discount special: enter MAY at checkout for 9% off. *
close promo banner icon

Exhaust System Kit

Borla - S-Type Axle-Back (11906)

$1,691.99

$1,894.99

You save: $203.00 (11%) off MSRP

Ships directly from manufacturer
Check to see if this fits your vehicle

This part fits

  1. 2015 Chevrolet Corvette Z06 6.2L V8 cid:376 cc:6162
Authorized Dealer

About this product

Part #: 11906

Borla Performance has once again proven why we have a led the aftermarket performance exhaust industry for over 30 years. Borla Performance Industries; the original pioneers of high quality; austinetic stainless steel free flow exhaust utilizes patented award and race winning technology to deliver quality; sound; performance gains; and enhanced fuel economy. All with an easy bolt on installation. All Borla street products carry an unsurpassed written million-mile warranty.

More Details

Exhaust TypeDual
Exit PositionRear
Exit StyleStraight
Inlet Inside Diameter (in.)2.75
MaterialT-304 Stainless Steel
Muffler TypeStraight-Through
Outlet Outside Diameter (in.)2.25
System TypeAxle Back
Tail Pipe MaterialStainless Steel
Tip Size7.19 in.
Tubing Diameter2.75 in.

See what our community says about borla products

product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
The sound is amazing! Can't wait to get my DP for ZZP to amp the sound.
Is this your first time buying from this brand? Did you consider other brands?
First time, but I've been watching there product for years.
View on Josh's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
It's borla duh
Is this your first time buying from this brand? Did you consider other brands?
Yes and no I went straight to borla Plan on getting one for my laser as well
Was it easy to install? Any installation tips that will help others?
I installed it on my 89 Cherokee but then removed it installed it on scorpinok then a buddy removed it and redid my exhaust so it's side exit
Once you've had a chance to use the product, did it meet your expectations?
Oh yes ohhhh yes it did
Any additional comments?
Pretty expensive for min wage here In Idaho it's $7.25/hour and rent is usually 5-600 a month
View on Jm_'s build
Matt Gilbert

232

Matt Gilbert
2014 Subaru BRZ
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Price quality and sound
Is this your first time buying from this brand? Did you consider other brands?
Yes, researched many others
Was it easy to install? Any installation tips that will help others?
Easy install
Once you've had a chance to use the product, did it meet your expectations?
Great product
View on Matt's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
I really bought this exhaust because of the sound. I wanted something that had a good performance sound at startup, was loud when you're on it and quiet as stock when you're not. This is the perfect sounding exhaust. Any performance gains are just an added plus.
Is this your first time buying from this brand? Did you consider other brands?
While this is the first time buying from this brand. I had a time deciding on the S-Type or ATAK. The S-Type has proven to be loud enough.
Was it easy to install? Any installation tips that will help others?
I had it professionally installed. It cost $280.
Once you've had a chance to use the product, did it meet your expectations?
Definitely YES. It was a bit pricey but I consider it money well spent.
View on Damon's build
Terrence Johns

138

Terrence Johns
2007 Ford Mustang
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Every time I start my car, be it a cold start or a restart at the grocery store, it always makes me feel good:deep in my soul. The complete Borla exhaust set up its beyond anything I could have ever imagined. Necks snap everywhere I go and it always leaves me with a smile on my face and the thought of "that's it. I've done it".
Is this your first time buying from this brand? Did you consider other brands?
No, I didn't even think about other brands.
Was it easy to install? Any installation tips that will help others?
Pretty straight forward, take the old exhaust off, slip the new one on.
Once you've had a chance to use the product, did it meet your expectations?
Meeting and exceeding my expectations every day.
View on Terrence's build
California prop 65 warningWARNING: Cancer and Reproductive Harm www.p65warnings.cs.gov

*Some manufacturer restrictions apply.

About Borla

BORLA® is committed to providing world-class exhaust products which surpass the expectations of our customers. To that end, our facility is complete with a state-of-the art test and development center where we are continually improving our manufacturing efficiency and standards. We have pioneered a variety of improvements in the design of performance exhaust systems. Alex Borla currently holds several US patents for innovative exhaust system technology, and the company has won numerous \u0022Best New Product\u0022 awards in the industry. Every BORLA® Cat-Back™ system, Header and Axle-Back is made from austenitic stainless steel (superior to 409 or aluminized steel) employing mandrel-bent tubing, all-welded construction, and is designed for accurate fit and easy installation. Over 30 years experience and special merge collector technology provide the ultimate in power and endurance.

Benefits of adding this mod

An upgraded exhaust system is one of the easiest modifications that offers an immediate, noticeable performance improvement. Whether you’re cruising an M3 or modding a diesel truck, an upgraded exhaust will open up the restrictive factory system, allowing your engine to breathe better and deliver peak power! From lighter weight exhaust headers to improved cat-back systems, to better sounding mufflers, modifying your exhaust setup is a great place to express the character of your ride in a unique and cost effective way. Whatever you’re looking for in a modified exhaust system, we can provide the absolute best systems to make your vision a reality.

shipping-worldwide-jpg

we ship worldwide!

Based in California with 3 warehouses across the country, we’re sending out shipments everyday of the week, even Saturdays. Because your next mod shouldn’t have to wait.

+ FREE GROUND SHIPPING ON U.S. ORDERS OVER $99
International shipping icon
Have a question? Ask an Expert!

Finding the best parts can be tricky

- but not to worry! Our team of experienced American Muscle, JDM, Euro, and off-road tuners are ready to answer your questions (as long as we’re not in the garage wrenching on our own builds).

chat-iconLive Chat
Ask our expert tuners anything!
call_iconCall Us
1 (800) 959-4304

Wheelwell wants to be the new online hub for car parts and accessories.

Wheelwell helps you organize all your stuff for your car, I’ve loaded all my cars on Wheelwell and you can see all the parts I’ve put in them and that may help you make a decision with your own build.

Matt Farah

Smoking Tire / The Drive

Thank you for all the help, really. You guys are awesome. This is all great info and I really appreciate everything you have done to help me with my build.

James M.

Ford Focus ST

Your customer service is wonderful. Thank you for taking care of this. My review will express all. Thank you!

Wallace R

Chevrolet Silverado 1500