cylinder-heads

Edelbrock 60107 - Engine Cylinder Head

rating-star review rating-star review 1rating-star review 2rating-star review 3rating-star review 4

$828.95

Discontinued

This product has been discontinued by the manufacturer.

This is a universal fit product

  1. That means this product doesn’t have fitment for any specific vehicle.
  2. If fitment is applicable for your application, be sure to check compatibility with the other components.
Authorized Dealer
white carb warning, not legal street use in California Not for sale or street use in California.

About this product

Part #: 60107

These Cylinder Heads are designed as a bolt-on performance upgrade for any 1967-91 AMX, Javelin or Jeep with a 343, 360, 390 or 401 AMC V8 engine. They include adjustable rocker studs and guide plates set-up for use with small-block Ford style adjustable 1.6:1 ratio rockers. The intake flange is dual-drilled to accommodate early and late model intake bolt patterns, covering 1967-91. Complete heads include largerthan- stock valve springs to handle most high-lift cams. They feature stock location ports for compatibility with standard manifolds and headers. A direct bolt-on for 1970 and later engines with 1/2" head bolts, these heads include step-dowel pins for pre-1970 engines. Their dual-quench combustion chambers produce approximately 9.5:1 compression in 401 V8 engines. The 45° intake seat angle offers improved mid- to high-lift flow over the stock 30° angle. Performer cylinder head #60129 and #60139 have a machined heat crossover for 50-state emissions legal performance. INSTALLATION NOTE: Match with Edelbrock head gasket sets. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. Use Edelbrock Step Washer Kit #9693 on 1967-69 engines with 7/16" head bolts. Deck thickness: 5/8", rocker stud diameter: 3/8", pushrod diameter: 5/16" (width of slot in guide plate).

More Details

Cylinder Head TypeStandard
EmissionNon-Emissions
Engine Make/SizeAMC 290-401
FinishSatin
PreparationRequires Professional Preparation (Bare)
TypeBare
UsageRacing
Additional Documents
  1. Installation Instructionspdf

See what our community says about edelbrock products

product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Performance
What were you trying to accomplish by adding this product?
More power
Was it easy install? Any installation tips that will help others?
Professionally installed
Once you’ve had a chance to use the product, did it meet your expectations?
Yes
View on Michael's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
It fit the price range I was willing to pay, vs the $600+ quote I was offered to have the original intake repaired. Also, I intend to reuse the original Carter-built M4MC Quadrajet carburetor, which this intake will accept.
What were you trying to accomplish by adding this product?
Replace the original intake manifold that was cracked during removal
View on Kenny's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Reliability and power delivery
What were you trying to accomplish by adding this product?
More horsepower, but not upsetting the balance of the platform
Was it easy install? Any installation tips that will help others?
I had it professionally installed.
Once you’ve had a chance to use the product, did it meet your expectations?
Exceeded my expectations, was afraid the balance of the platform would be upset but I'm glad I was wrong!
View on Tyler's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
More power baby!
What were you trying to accomplish by adding this product?
Horsepower!
Was it easy install? Any installation tips that will help others?
Professional done
Once you’ve had a chance to use the product, did it meet your expectations?
Better than expected
Any additional comments?
Have someone do it.
View on Cody's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Proven product
What were you trying to accomplish by adding this product?
Eliminating the junk electric quadra jet
Once you’ve had a chance to use the product, did it meet your expectations?
Much better Throttle response and tune ability
View on Allen's build
California prop 65 warningWARNING: Cancer and Reproductive Harm www.p65warnings.cs.gov

*Some manufacturer restrictions apply.

About Edelbrock

Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation’s premier designers, manufacturers and distributor of performance replacement parts for the automotive aftermarket. Edelbrock produces their core products in the United States of America using state-of-the-art equipment in their world class manufacturing facilities. Edelbrock, LLC encompasses five locations in Southern California and one location in North Carolina totaling more than 500,000 square feet.

shipping-worldwide from warehouse

we ship worldwide!

Based in California with 3 warehouses across the country, we’re sending out shipments everyday of the week, even Saturdays. Because your next mod shouldn’t have to wait.

+ FREE GROUND SHIPPING ON U.S. ORDERS OVER $99
Globe international shipping icon
Have a question? Ask an Expert!

Finding the best parts can be tricky

- but not to worry! Our team of experienced American Muscle, JDM, Euro, and off-road tuners are ready to answer your questions (as long as we’re not in the garage wrenching on our own builds).

Decorative testimonal quote icon

What do you get when you mix Facebook, Amazon, and your favorite online car forum? You get Wheelwell.com.

undefined supporting their testimonial

Hot Rod Magazine

Decorative testimonal quote icon

Wheelwell helps you organize all your stuff for your car, I’ve loaded all my cars on Wheelwell and you can see all the parts I’ve put in them and that may help you make a decision with your own build.

Matt Farah supporting their testimonial

Matt Farah

The Smoking Tire / The Drive

Decorative testimonal quote icon

This is an awesome new site where enthusiasts can get together and figure out what products work best on their ride.

undefined supporting their testimonial

The Truck Show Podcast