cylinder-heads

Edelbrock 609815 - Engine Cylinder Head

rating-star review rating-star review 1rating-star review 2rating-star review 3rating-star review 4

$803.50

Discontinued

This product has been discontinued by the manufacturer.

Image coming soon

This is a universal fit product

  1. That means this product doesn’t have fitment for any specific vehicle.
  2. If fitment is applicable for your application, be sure to check compatibility with the other components.
Authorized Dealer
white carb warning, not legal street use in California Not for sale or street use in California.

About this product

Part #: 609815

Cylinder Head Specifications: Combustion chamber vol: 64cc; Intake runner vol: 200cc; Exhaust runner vol: 80cc; Intake v. diameter: 2.02"; Exhaust v. diameter: 1.60"; V. stem diameter: 11/32"; V. guides: Maganese bronze; Deck thickness: 5/8"; V. spring diameter: 1.46"; V. spring maximum lift: .575"; Rocker stud: 3/8"; Guideplate: Hardened steel; Pushrod diameter: 5/16"; V. angle: 23°; Exh. port location: Stock; Spark plug fitment: 14mm x .750 reach, gasket seat. Edelbrock E-Tec Cylinder Heads are replacements for 302, 327, 350 & 400 c.i.d. S/B Chevy engines with "Vortec-style" manifolds. They feature an LT1-style raised runner intake port design for increased air-flow and ultimate performance. A unique combustion chamber design positions the spark plug closer to the center of the cylinder, promoting a more efficient combustion resulting in more power. These heads include an adjustable rocker stud and guide plate set-up for use with adjustable rockers or washers to properly position the stud height to accommodate factory style self-aligning rocker arms. They have 20% more exhaust flow than cast iron Vortec heads, great performance up to 6000 rpm and can produce 9.5:1 compression with stock pistons in 350 cubic-inch engines. RPM E-Tec cylinder heads are dual-drilled and will accept 1987-95 centerbolt and/or 1986 & prior perimeter flange mount valve covers and most stock exhaust manifolds. INSTALLATION NOTE: Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. To use stock rockers on small-block Chevy heads, .100" longer than stock pushrods are required. Edelbrock pushrods #9629 are recommended. Use Head Bolt Kits for easy installation. S/B Chevy heads may not be used on engines with less than 4" bore (262, 265, 283, 305, 307 c.i.d.) except with cams having less than .450" valve lift.

More Details

Cylinder Head TypeStandard
EmissionNon-Emissions
Engine Make/SizeChevy Small Block (262-400)
FinishPolished Finish
PreparationBolt On (Not Required)
TypeComplete
UsageStreet/Performance

See what our community says about edelbrock products

Chris Hoover

323

Chris Hoover
1991 Honda CRX
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
I wanted a beefy intake manifold that would provide more power over stock.
Is this your first time buying from this brand? Did you consider other brands?
Yes. I considered Skunk2 beforehand but wanted something that didn't look OEM and performed better than an OEM style manifold.
Was it easy to install? Any installation tips that will help others?
It was easy to install. It is larger than stock so consider any fitment issues.
Once you've had a chance to use the product, did it meet your expectations?
The car has not been started yet but I expect this manifold to perform very well and make great power.
View on Chris's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Can't beat the scream of a 4 barrell
View on Jared's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
price quality
Is this your first time buying from this brand? Did you consider other brands?
no
View on Jeff's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
SHINY
Is this your first time buying from this brand? Did you consider other brands?
Yep. First time.
Was it easy to install? Any installation tips that will help others?
Yea. Very easy.
Once you've had a chance to use the product, did it meet your expectations?
It exceeded my expectations and it made a major increase in my 0-60 time.
View on Graysen's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Quality, price, and performance are all high
View on Brett's build
California prop 65 warningWARNING: Cancer and Reproductive Harm www.p65warnings.cs.gov

*Some manufacturer restrictions apply.

About Edelbrock

Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation’s premier designers, manufacturers and distributor of performance replacement parts for the automotive aftermarket. Edelbrock produces their core products in the United States of America using state-of-the-art equipment in their world class manufacturing facilities. Edelbrock, LLC encompasses five locations in Southern California and one location in North Carolina totaling more than 500,000 square feet.

shipping-worldwide from warehouse

we ship worldwide!

Based in California with 3 warehouses across the country, we’re sending out shipments everyday of the week, even Saturdays. Because your next mod shouldn’t have to wait.

+ FREE GROUND SHIPPING ON U.S. ORDERS OVER $99
Globe international shipping icon
Have a question? Ask an Expert!

Finding the best parts can be tricky

- but not to worry! Our team of experienced American Muscle, JDM, Euro, and off-road tuners are ready to answer your questions (as long as we’re not in the garage wrenching on our own builds).

Decorative testimonal quote icon

What do you get when you mix Facebook, Amazon, and your favorite online car forum? You get Wheelwell.com.

undefined supporting their testimonial

Hot Rod Magazine

Decorative testimonal quote icon

Wheelwell helps you organize all your stuff for your car, I’ve loaded all my cars on Wheelwell and you can see all the parts I’ve put in them and that may help you make a decision with your own build.

Matt Farah supporting their testimonial

Matt Farah

The Smoking Tire / The Drive

Decorative testimonal quote icon

This is an awesome new site where enthusiasts can get together and figure out what products work best on their ride.

undefined supporting their testimonial

The Truck Show Podcast