cylinder-heads

Edelbrock 609815 - Engine Cylinder Head

rating-star review rating-star review 1rating-star review 2rating-star review 3rating-star review 4

Unavailable

This product is currently unavailable.

Image coming soon

This is a universal fit product

  1. That means this product doesn’t have fitment for any specific vehicle.
  2. If fitment is applicable for your application, be sure to check compatibility with the other components.
Authorized Dealer
white carb warning, not legal street use in California Not for sale or street use in California.

About this product

Part #: 609815

Cylinder Head Specifications: Combustion chamber vol: 64cc; Intake runner vol: 200cc; Exhaust runner vol: 80cc; Intake v. diameter: 2.02"; Exhaust v. diameter: 1.60"; V. stem diameter: 11/32"; V. guides: Maganese bronze; Deck thickness: 5/8"; V. spring diameter: 1.46"; V. spring maximum lift: .575"; Rocker stud: 3/8"; Guideplate: Hardened steel; Pushrod diameter: 5/16"; V. angle: 23°; Exh. port location: Stock; Spark plug fitment: 14mm x .750 reach, gasket seat. Edelbrock E-Tec Cylinder Heads are replacements for 302, 327, 350 & 400 c.i.d. S/B Chevy engines with "Vortec-style" manifolds. They feature an LT1-style raised runner intake port design for increased air-flow and ultimate performance. A unique combustion chamber design positions the spark plug closer to the center of the cylinder, promoting a more efficient combustion resulting in more power. These heads include an adjustable rocker stud and guide plate set-up for use with adjustable rockers or washers to properly position the stud height to accommodate factory style self-aligning rocker arms. They have 20% more exhaust flow than cast iron Vortec heads, great performance up to 6000 rpm and can produce 9.5:1 compression with stock pistons in 350 cubic-inch engines. RPM E-Tec cylinder heads are dual-drilled and will accept 1987-95 centerbolt and/or 1986 & prior perimeter flange mount valve covers and most stock exhaust manifolds. INSTALLATION NOTE: Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. To use stock rockers on small-block Chevy heads, .100" longer than stock pushrods are required. Edelbrock pushrods #9629 are recommended. Use Head Bolt Kits for easy installation. S/B Chevy heads may not be used on engines with less than 4" bore (262, 265, 283, 305, 307 c.i.d.) except with cams having less than .450" valve lift.

More Details

Cylinder Head TypeStandard
EmissionNon-Emissions
Engine Make/SizeChevy Small Block (262-400)
FinishPolished Finish
PreparationBolt On (Not Required)
TypeComplete
UsageStreet/Performance

See what our community says about edelbrock products

product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
I was just hyped about getting a old truck with a old engine and I just wanted it to look good
What were you trying to accomplish by adding this product?
I was trying to make my engine bay more appealing
Was it easy install? Any installation tips that will help others?
Yes it was super easy to install, took me like 7mins to get the old air cleaner off and 30secs to get the new one on
Once you’ve had a chance to use the product, did it meet your expectations?
Yes it made my engine bag more appealing
Any additional comments?
I think everyone should start with this cheap air cleaner is they want to made a Chevy small block
View on Leonel's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Came with the truck. Easy to service.
What were you trying to accomplish by adding this product?
Driveability and easy to tune.
Was it easy install? Any installation tips that will help others?
The rebuild went well and it drives great.
Once you’ve had a chance to use the product, did it meet your expectations?
Yes.
View on Steven's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
The power output!
View on Formula's build
Mike Mawhinney

185

Mike Mawhinney
2014 Ford Mustang
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
The price of this kit is great. The install is also super easy. Car feels strong, didn’t go near as fast as I thought it would at the track.added heavy rims since stock runs but still should be faster if the 559hp rating is to be believed.my friends bone stock 455hp newer Camaro vert is still beating it by a tenth. Gonna crank it up. Makes no sound at 5psi either.
What were you trying to accomplish by adding this product?
Lower ET’s
Was it easy install? Any installation tips that will help others?
Easy easy install.pretty good instructions in a 3 ring binder with pics. Could still be better but pretty good
Once you’ve had a chance to use the product, did it meet your expectations?
I’m sure one I crank this blower up to like 8psi and get a real tune from someone other than edelbrock(ridiculously rich tunes)it will be an absolute animal
Any additional comments?
Spark plugs. Buy them now!! And a gt500 fan.I got mine on this site for $100 off no bullshit. This kit makes heat even at 5psi
View on Mike's build
Anthony Diaz-Brown

312

Anthony Diaz-Brown
1966 Ford Mustang
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Known Name
What were you trying to accomplish by adding this product?
Improved Air frow
Was it easy install? Any installation tips that will help others?
Personal Install
Once you’ve had a chance to use the product, did it meet your expectations?
No issues found
View on Anthony's build

MOST POPULAR Cylinder Heads Engine

California prop 65 warningWARNING: Cancer and Reproductive Harm www.p65warnings.cs.gov

*Some manufacturer restrictions apply.

About Edelbrock

Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation’s premier designers, manufacturers and distributor of performance replacement parts for the automotive aftermarket. Edelbrock produces their core products in the United States of America using state-of-the-art equipment in their world class manufacturing facilities. Edelbrock, LLC encompasses five locations in Southern California and one location in North Carolina totaling more than 500,000 square feet.

shipping-worldwide from warehouse

we ship worldwide!

Based in California with 3 warehouses across the country, we’re sending out shipments everyday of the week, even Saturdays. Because your next mod shouldn’t have to wait.

+ FREE GROUND SHIPPING ON U.S. ORDERS OVER $99
Globe international shipping icon
Have a question? Ask an Expert!

Finding the best parts can be tricky

- but not to worry! Our team of experienced American Muscle, JDM, Euro, and off-road tuners are ready to answer your questions (as long as we’re not in the garage wrenching on our own builds).

Top Builds

For 2007 Lexus IS250

The best modders use Wheelwell to build their dream rides.

Decorative testimonal quote icon

What do you get when you mix Facebook, Amazon, and your favorite online car forum? You get Wheelwell.com.

undefined supporting their testimonial

Hot Rod Magazine

Decorative testimonal quote icon

Wheelwell helps you organize all your stuff for your car, I’ve loaded all my cars on Wheelwell and you can see all the parts I’ve put in them and that may help you make a decision with your own build.

Matt Farah supporting their testimonial

Matt Farah

The Smoking Tire / The Drive

Decorative testimonal quote icon

This is an awesome new site where enthusiasts can get together and figure out what products work best on their ride.

undefined supporting their testimonial

The Truck Show Podcast