cylinder-heads

Edelbrock 61709 - Engine Cylinder Head

rating-star review rating-star review 1rating-star review 2rating-star review 3rating-star review 4

$1,418.95

Discontinued

This product has been discontinued by the manufacturer.

This is a universal fit product

  1. That means this product doesn’t have fitment for any specific vehicle.
  2. If fitment is applicable for your application, be sure to check compatibility with the other components.
Authorized Dealer
white carb warning, not legal street use in California Not for sale or street use in California.

About this product

Part #: 61709

Cylinder Head Specifications: Combustion chamber volume: 58cc; Intake runner volume: 225cc; Exhaust runner volume: 62cc; Intake valve diameter: 2.15"; Exhaust valve diameter: 1.60"; Valve stem diameter: 11/32"; Valve guides: Manganese bronze; Deck thickness: 5/8"; Valve spring diameter: 1.55"; Valve spring maximum lift: .650"; Rocker stud: N/A; Guideplate: N/A; Pushrod diameter: 5/16"; Valve angle: 16°; Exhaust port location: Raised; Spark plug fitment: 14mm x 3/4 reach, gasket seat * These cylinder heads are for use on 1967-1991, 318-360 c.i.d. Chrysler LA engines. They feature fully CNC ported 58cc combustion chambers and have an intake port volume of 225cc. These cylinder heads are an in-line valve design incorporating a 16° valve angle (stock is 18°) for improved air flow and increased power levels over heavily ported stock versions. They also feature the Chrysler W5 bolt pattern and have raised exhaust ports. The intake port has also been raised approximately 3/4" and the flange has also been extended to accommodate a stock (race) intake manifold such as our Super Victor #2815. Finally, a 5.56" overall length valve (+0.600" from stock) and raised rocker cover permit larger port cross-sections than in the stock head. Four versions are available; bare, bare with valves, complete (for hydraulic/flat tappet cams and solid roller cams) and Pro Port Raw. End-seal spacers are provided. ** These heads require the use of a 14mm x 3/4" reach, flat gasket spark plug with a heat range appropriate to your application. Deck thickness: 5/8", pushrod diameter: 5/16". *** These heads are designed to accomodate stock Big Block Mopar Wedge Rocker arm assemblies (.150" minimum intake offset).

More Details

Cylinder Head Type16 Degree
EmissionNon-Emissions
Engine Make/SizeMopar 318-360
FinishSatin
PreparationRequires Professional Preparation (Bare)
TypeBare
UsageRacing
Additional Documents
  1. Installation Instructionspdf

See what our community says about edelbrock products

product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Low rise, single plane, easily matched to AFR heads.
View on Carl's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
stock pump is cast iron this is aluminum, saves weight and flows way more coolant.
What were you trying to accomplish by adding this product?
better cooling less weight over front axle.
View on Jacob's build
Travis Lamberson

316

Travis Lamberson
2000 Pontiac Firebird
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Convenience for the next cam swap
What were you trying to accomplish by adding this product?
Looks and save time for next cam swap
Was it easy install? Any installation tips that will help others?
Did it myself and was easy.
Once you’ve had a chance to use the product, did it meet your expectations?
Exceeded expectations
View on Travis's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Performance
What were you trying to accomplish by adding this product?
More power
Was it easy install? Any installation tips that will help others?
Professionally installed
Once you’ve had a chance to use the product, did it meet your expectations?
Yes
View on Michael's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Proven product
What were you trying to accomplish by adding this product?
Eliminating the junk electric quadra jet
Once you’ve had a chance to use the product, did it meet your expectations?
Much better Throttle response and tune ability
View on Allen's build
California prop 65 warningWARNING: Cancer and Reproductive Harm www.p65warnings.cs.gov

*Some manufacturer restrictions apply.

About Edelbrock

Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation’s premier designers, manufacturers and distributor of performance replacement parts for the automotive aftermarket. Edelbrock produces their core products in the United States of America using state-of-the-art equipment in their world class manufacturing facilities. Edelbrock, LLC encompasses five locations in Southern California and one location in North Carolina totaling more than 500,000 square feet.

shipping-worldwide from warehouse

we ship worldwide!

Based in California with 3 warehouses across the country, we’re sending out shipments everyday of the week, even Saturdays. Because your next mod shouldn’t have to wait.

+ FREE GROUND SHIPPING ON U.S. ORDERS OVER $99
Globe international shipping icon
Have a question? Ask an Expert!

Finding the best parts can be tricky

- but not to worry! Our team of experienced American Muscle, JDM, Euro, and off-road tuners are ready to answer your questions (as long as we’re not in the garage wrenching on our own builds).

Decorative testimonal quote icon

What do you get when you mix Facebook, Amazon, and your favorite online car forum? You get Wheelwell.com.

undefined supporting their testimonial

Hot Rod Magazine

Decorative testimonal quote icon

Wheelwell helps you organize all your stuff for your car, I’ve loaded all my cars on Wheelwell and you can see all the parts I’ve put in them and that may help you make a decision with your own build.

Matt Farah supporting their testimonial

Matt Farah

The Smoking Tire / The Drive

Decorative testimonal quote icon

This is an awesome new site where enthusiasts can get together and figure out what products work best on their ride.

undefined supporting their testimonial

The Truck Show Podcast