close promo banner icon

cat-back

Flowmaster 717782 - FlowFX Cat-Back Exhaust System

rating-star review rating-star review 1rating-star review 2rating-star review 3rating-star review 4

$929.95

$1,033.95

You save: $104.00 (10%) off MSRP

stock messaging Out of StockOut of Stock
Order now to be added to the priority list
Check to see if this fits your vehicle

This part fits

  1. 2008 Nissan 350Z
  2. 2007 Nissan 350Z
  3. 2006 Nissan 350Z
  4. 2005 Nissan 350Z
  5. 2004 Nissan 350Z
  6. 2003 Nissan 350Z
Authorized Dealer

About this product

Part #: 717782

Introducing Flowmaster's new line of FlowFX Cat-back exhaust systems for the 2003-2008 Nissan 350Z Coupes and Convertibles with 3.5L V6 engine. This dual 2.50 inch system is perfect for the person looking for a moderate aggressive exterior and interior sound level with all of the performance benefits that you would expect from Flowmaster. Features include new bright finish 409S stainless steel mandrel bent tubing, Scavenger X-pipe for added power with a unique exhaust note flowing into a FlowFX straight-through performance crossflow muffler for maximum power and a deep aggressive sound. The system is then finished off with dual 4.00 inch Carbon fiber wrapped 304 stainless steel tips showing off the Flowmaster(R) logo. Designed for easy installation, this system includes all necessary parts, hardware and detailed instructions.

More Details

Catalytic Converter IncludedNo
Exhaust SeriesFlow FX
Exhaust TypeCat-Back
Exit PositionDual Out Rear
Inlet Inside Diameter2.500 in.
Mount TypeUses Factory Hangers
Muffler Body Material409S Stainless Steel
Muffler Body ShapeOval
Muffler FinishBrushed
Muffler Inlet Diameter2.500 in.
Muffler Inlet LocationDual Inlet
Muffler Outlet Diameter2.500 in.
Muffler Outlet LocationDual Outlet
Muffler Part NumberKit Only
Muffler SeriesFlow FX
Muffler TypeAbsorption
Single or DualDual
Sound LevelModerate/Aggressive
System TypeCat Back
Tail Pipe Diameter2.500 in.
Tip Diameter4.000 in.
Tip Edge StyleRolled
Tip FinishNatural
Tip Length5.250 in.
Tip LogoPrinted
Tip Material304 StainlessSteel/Carbon Fiber
Tip Quantity2
Tip TypeDouble Wall
Tubing Diameter2.500 in.
Tubing Material409S Stainless Steel
Additional Documents
  1. Technical Drawingpdf
  2. Warrantypdf

See what our community says about flowmaster products

product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Deep quality sound.
Is this your first time buying from this brand? Did you consider other brands?
No. And yes I considered a few different brands.
Was it easy to install? Any installation tips that will help others?
Yes.
Once you've had a chance to use the product, did it meet your expectations?
A little on the quiet sid but good sound
View on Josh's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
owned flowmaster products before, always happy
Is this your first time buying from this brand? Did you consider other brands?
nope
Was it easy to install? Any installation tips that will help others?
cost about $80 to install at my local Meineke
View on John's build
Eduardo Ambriz

164

Eduardo Ambriz
2014 Ford Fiesta
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
I chose it because it was a good value in terms of sound for the money. It was also plug and play whereas other systems required a fair bit of modification on my part and I didn't want to deal with that.
Is this your first time buying from this brand? Did you consider other brands?
This is my first time buying from them and I had considered Borla, but went with fFowmaster because of its value.
Was it easy to install? Any installation tips that will help others?
I installed it myself and it wasn't all that easy. The nut is just supposed to be removed from the bolt and the new exhaust should be bolted right back on. The thing is that my bolt was stripped and it was pressed in from the factory so it had to get pushed back out and replaced with a new bolt and nut. Other than that it was plug and play.
Once you've had a chance to use the product, did it meet your expectations?
It is definitely a good value as it gives a deeper tone while making it a bit louder, but not loud enough that it gets annoying. It also doesn't drone too bad when just driving around town.
View on Eduardo's build
Brian Pawlowski

207

Brian Pawlowski
2016 Ford F-150
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Sounds good, good sound for price.I have friends who have flow master.
Is this your first time buying from this brand? Did you consider other brands?
First time for flow master. Was looking at Borla but the price tag was just too much. Borla is more expensive because they use 304 stainless steel where flow master used 409 which is a less durable version of stainless steel, and has been known to rust out.
Was it easy to install? Any installation tips that will help others?
Need a lift or need to cut exhaust out if on ground. Lay out parts first and have clamps ready. Overall wasn't bad at all.
Once you've had a chance to use the product, did it meet your expectations?
Yes! It is loud and sounds good. Time will tell about the rust issues.
View on Brian's build
Kaelen Lillard

132

Kaelen Lillard
1994 Lexus LS 400
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
I wanted the car to have a rumble but not too loud.
Is this your first time buying from this brand? Did you consider other brands?
Yes, I did consider Magnaflow.
View on Kaelen's build
California prop 65 warningWARNING: Cancer and Reproductive Harm www.p65warnings.cs.gov

*Some manufacturer restrictions apply.

About Flowmaster

Manufacturer of performance exhaust systems, mufflers, cold air intakes, turbo boost modules, catalytic converters, race mufflers, headers and numerous exhaust accessories for late model cars, trucks, off-road, Jeeps, SUV’s, classic muscle cars, powersports vehicles and more. Flowmaster® gives you lots of exhaust choices with 12 designs of chambered mufflers, 3 styles of our exclusive “laminar-flow” mufflers and a new line of FlowFX “straight-through” performance mufflers, along with 5 sound categories of exhaust systems, giving you the customer, the power to custom tailor the sound of your vehicle whether you prefer mild, moderate or aggressive tones and sound levels.

shipping-worldwide from warehouse

we ship worldwide!

Based in California with 3 warehouses across the country, we’re sending out shipments everyday of the week, even Saturdays. Because your next mod shouldn’t have to wait.

+ FREE GROUND SHIPPING ON U.S. ORDERS OVER $99
Globe international shipping icon
Have a question? Ask an Expert!

Finding the best parts can be tricky

- but not to worry! Our team of experienced American Muscle, JDM, Euro, and off-road tuners are ready to answer your questions (as long as we’re not in the garage wrenching on our own builds).

chat-iconLive Chat
Ask our expert tuners anything!
call_iconCall Us
1 (800) 959-4304
Decorative testimonal quote icon

What do you get when you mix Facebook, Amazon, and your favorite online car forum? You get Wheelwell.com.

undefined supporting their testimonial

Hot Rod Magazine

Decorative testimonal quote icon

Wheelwell helps you organize all your stuff for your car, I’ve loaded all my cars on Wheelwell and you can see all the parts I’ve put in them and that may help you make a decision with your own build.

Matt Farah supporting their testimonial

Matt Farah

The Smoking Tire / The Drive

Decorative testimonal quote icon

This is an awesome new site where enthusiasts can get together and figure out what products work best on their ride.

undefined supporting their testimonial

The Truck Show Podcast