cold-air-intakes

Injen RD1306P - Cold Air Intake System

rating-star review rating-star review 1rating-star review 2rating-star review 3rating-star review 4

Unavailable

This product is currently unavailable.

Check to see if this fits your vehicle

TOP MEMBER BUILDS RUNNING THIS MOD

Injen RD1306P - Cold Air Intake System

This part fits

  1. 2009 Honda S2000
  2. 2008 Honda S2000
  3. 2007 Honda S2000
  4. 2006 Honda S2000
Authorized Dealer

About this product

Part #: RD1306P

The Injen RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder denser air. Although most of the Injen RD series are a one-piece design several are two-piece designs due to the mass air flow meters. Every Injen RD system is certified or pending by the California Air Resource Board and backed by Injen Technologys limited lifetime warranty.

More Details

System TypeCold Air Induction
Additional Documents
  1. Technical Drawingjpg
  2. Installation Instructionspdf

See what our community says about injen products

Shaun Lindvall

61

Shaun Lindvall
1998 Honda Prelude
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Came on the car
What were you trying to accomplish by adding this product?
Came on the car
Was it easy install? Any installation tips that will help others?
N/A
Once you’ve had a chance to use the product, did it meet your expectations?
It is a short ram intake, it functions as expected
View on Shaun's build
Franklyn Taveras

138

Franklyn Taveras
2004 Toyota Matrix
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Proven to make most power, sounds and looks great, ease of install, brand reputation,
What were you trying to accomplish by adding this product?
Slightly more hp/better fuel mileage?, sound, looks, stock intake parts were worn out
Was it easy install? Any installation tips that will help others?
Pull the hose up through the front instead of the side or cut it so it doesn't look doofy like mine lol. Also intake sits a few millimeters away from battery terminal with big battery. I recommend putting a piece of rubber or tape around the terminal to avoid contact with the intake pipe. If you have a stock/small battery it shouldn't be a problem
Once you’ve had a chance to use the product, did it meet your expectations?
I guess no complaints so far but it's just an intake. Pretty basic mod in every way lol
View on Franklyn's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
Any additional comments?
Installed as a ram intake, with both sections in the engine bay. This vehicle is too likely to be submerged to risk a true Cai. Eventually I intend to route the intake into the cowl for the best of both worlds.
View on Keenan's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Best SRI for the car according to forumes
What were you trying to accomplish by adding this product?
better improved air intake
Was it easy install? Any installation tips that will help others?
somewhat, placement was tough
Once you’ve had a chance to use the product, did it meet your expectations?
yes
View on Jason's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Most filter surface to allow the most gal/min of air for upcoming tune
What were you trying to accomplish by adding this product?
Maximizes air intake
Was it easy install? Any installation tips that will help others?
Getting the filter box over the filter was a little bit of a pain, but with enough swearing it'll go.
Once you’ve had a chance to use the product, did it meet your expectations?
Better intake sound and a noticeable improvement in tq and hp.
Any additional comments?
I did not install the snorkel tho I may do that at a later time.
View on Steve's build
California prop 65 warningWARNING: Cancer and Reproductive Harm www.p65warnings.cs.gov

*Some manufacturer restrictions apply.

About Injen

All Injen products are designed with the use of original OEM components and/or Injen-branded components. Injen does not guarantee fitment with use of other brands or modified parts.

shipping-worldwide from warehouse

we ship worldwide!

Based in California with 3 warehouses across the country, we’re sending out shipments everyday of the week, even Saturdays. Because your next mod shouldn’t have to wait.

+ FREE GROUND SHIPPING ON U.S. ORDERS OVER $99
Globe international shipping icon
Have a question? Ask an Expert!

Finding the best parts can be tricky

- but not to worry! Our team of experienced American Muscle, JDM, Euro, and off-road tuners are ready to answer your questions (as long as we’re not in the garage wrenching on our own builds).

Decorative testimonal quote icon

What do you get when you mix Facebook, Amazon, and your favorite online car forum? You get Wheelwell.com.

undefined supporting their testimonial

Hot Rod Magazine

Decorative testimonal quote icon

Wheelwell helps you organize all your stuff for your car, I’ve loaded all my cars on Wheelwell and you can see all the parts I’ve put in them and that may help you make a decision with your own build.

Matt Farah supporting their testimonial

Matt Farah

The Smoking Tire / The Drive

Decorative testimonal quote icon

This is an awesome new site where enthusiasts can get together and figure out what products work best on their ride.

undefined supporting their testimonial

The Truck Show Podcast