air-filters-universal-fit

Spectre 8136 - Air Filter

rating-star review rating-star review 1rating-star review 2rating-star review 3rating-star review 4

$31.59

Unavailable

This product is currently unavailable.

TOP MEMBER BUILDS RUNNING THIS MOD

Spectre 8136 - Air Filter

This is a universal fit product

  1. That means this product doesn’t have fitment for any specific vehicle.
  2. If fitment is applicable for your application, be sure to check compatibility with the other components.
Authorized Dealer

About this product

Part #: 8136

This Spectre High Performance Racing (HPR) Air Filter is a blue media clamp-on cone filter that can be used for a wide variety of applications. Using the included adapter rings, this filter can fit 3 inch, 3-1/2 inch, and 4 inch diameter tubes. Manufactured using high quality materials throughout, including oiled synthetic media, urethane, and steel mesh, this washable performance filter is precision engineered for low restriction and better performance. This filter's top houses an inverted cone filter for improved service life and enhanced flow potential. Designed with a triple chrome plated steel top and base, this 5-1/2 inch tall air filter is factory pre-oiled and ready to use.

More Details

Air Filter Large End Diameter6 in (152 mm)
Cap Outside DiameterOEM
ColorBlue
Diameter Inside (in.)3
Diameter Outside (in.)3
Filter MaterialNon-woven Synthetic
Filter StylePre-Oiled
Flange Angle0 degrees
Flange TypeCentered
Height (in.)5.25
Inner WireNo
ShapeOpen Conical
Top Outside Diameter4.75 in (121 mm)
Top StyleInverted
Additional Documents
  1. Technical Drawingpdf

See what our community says about spectre products

product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
It fit my vehicle and air filter
What were you trying to accomplish by adding this product?
Adapt the air filter to fit the vehicle.
Was it easy install? Any installation tips that will help others?
Easy to install, just had to buy longer bolts
Once you’ve had a chance to use the product, did it meet your expectations?
Yep
View on Jay's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Price
Once you’ve had a chance to use the product, did it meet your expectations?
Good value. It is of similar quality to the k&n but much cheaper and gives nearly identical performance
View on Joe's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Price and performance. Although not a traditional CAI, functions very well if installed right.
What were you trying to accomplish by adding this product?
Better engine bay noises, and a slight torque boost
Was it easy install? Any installation tips that will help others?
Easy to install
Once you’ve had a chance to use the product, did it meet your expectations?
It met my expectations. Love the sounds, not much of a difference overall
View on Brady's build
Juan Saucedo

72

Juan Saucedo
2006 Volvo S60
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Price
What were you trying to accomplish by adding this product?
Improved appearance and noise
Was it easy install? Any installation tips that will help others?
Tough install if you don't have tools
Once you’ve had a chance to use the product, did it meet your expectations?
Good bang for the buck
View on Juan's build
Michael Winn

103

Michael Winn
1986 Mazda RX-7
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
performance and look
What were you trying to accomplish by adding this product?
appearance mostly looks badass
Was it easy install? Any installation tips that will help others?
had to run a riser so it didn't hit the throttle cable, the riser had problems hitting the choke but It will work once I can fab up some intake pipes
Any additional comments?
good option for open hood applications being an engine swap there is no room for anything up front so I have to cut a hole in the hood regardless. Going with a exposed filter could allow water to get into the carb and I will not chance it.
View on Michael's build

TOP RATED Spectre Air Intake

California prop 65 warningWARNING: Cancer and Reproductive Harm www.p65warnings.cs.gov

*Some manufacturer restrictions apply.

shipping-worldwide from warehouse

we ship worldwide!

Based in California with 3 warehouses across the country, we’re sending out shipments everyday of the week, even Saturdays. Because your next mod shouldn’t have to wait.

+ FREE GROUND SHIPPING ON U.S. ORDERS OVER $99
Globe international shipping icon
Have a question? Ask an Expert!

Finding the best parts can be tricky

- but not to worry! Our team of experienced American Muscle, JDM, Euro, and off-road tuners are ready to answer your questions (as long as we’re not in the garage wrenching on our own builds).

Top Builds

For 1978 Chevrolet Caprice

The best modders use Wheelwell to build their dream rides.

Decorative testimonal quote icon

What do you get when you mix Facebook, Amazon, and your favorite online car forum? You get Wheelwell.com.

undefined supporting their testimonial

Hot Rod Magazine

Decorative testimonal quote icon

Wheelwell helps you organize all your stuff for your car, I’ve loaded all my cars on Wheelwell and you can see all the parts I’ve put in them and that may help you make a decision with your own build.

Matt Farah supporting their testimonial

Matt Farah

The Smoking Tire / The Drive

Decorative testimonal quote icon

This is an awesome new site where enthusiasts can get together and figure out what products work best on their ride.

undefined supporting their testimonial

The Truck Show Podcast