May discount special: enter MAY at checkout for 9% off. *
close promo banner icon

Disc Brake Upgrade Kit

StopTech - Red Caliper / Drilled Disc Front (82.058.5100.72)

Ships directly from manufacturer
Check to see if this fits your vehicle

This part fits

  1. 2006 Acura RSX Type S
  2. 2005 Acura RSX Type S
  3. 2004 Acura RSX Type S
  4. 2003 Acura RSX Type S
  5. 2002 Acura RSX Type S
Authorized Dealer

About this product

Part #: 82.058.5100.72

StopTech Big Brake Kits exceed stock performance in two key areas: First, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel and confidence-inspiring responsiveness. The key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why StopTech® developed the Balanced Brake Upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking. Every StopTech Balanced Big Brake Kit is engineered to produce that optimal balance using caliper bores and pistons specifically selected and tested for each vehicle application. This is what sets StopTech apart from off-the-shelf solutions. In contrast, a brake upgrade that adds too much front torque as many do, will reduce your car's ability to maximize the traction available from all four tires, robbing you of performance. In addition, a system that uses too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, limiting a driver's control of brake input.

More Details

See what our community says about stoptech products

product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Better pedal feel
Is this your first time buying from this brand? Did you consider other brands?
Yes, considered Russel brand
Was it easy to install? Any installation tips that will help others?
Installed myself,very easy if you can work on cars.
Once you've had a chance to use the product, did it meet your expectations?
Yes, working.
View on Josh's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
Quality and Price
Is this your first time buying from this brand? Did you consider other brands?
yes first time and yest also considered other brands
Was it easy to install? Any installation tips that will help others?
Yes
Once you've had a chance to use the product, did it meet your expectations?
Yes
View on Juan's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
The car's braking performance was terrible.
Is this your first time buying from this brand? Did you consider other brands?
No, I had it on my RSX-S
Was it easy to install? Any installation tips that will help others?
Paid a professional to install it.
Once you've had a chance to use the product, did it meet your expectations?
Yes, braking performance improved.
View on Jesus's build
Anthony Garcia

388

Anthony Garcia
2007 BMW 3 Series
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
I love the way the 335i comes to a seemlessly smooth stop from any speed. Slotting a rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The slots in our rotors allow the gases to escape giving better braking performance. Cross-drilling a rotor is a way to improve initial pad bite. With the additional leading edges at each hole, the pad is able to grab the rotor just a little bit harder
Is this your first time buying from this brand? Did you consider other brands?
View on Anthony's build
product page reviews icon 0product page reviews icon 1product page reviews icon 2product page reviews icon 3product page reviews icon 4
What made you choose this particular product?
The rotors are definitely doing their job. Heat soak is not an issue at all for these unlike the stock rotors. I would highly recommend.
Is this your first time buying from this brand? Did you consider other brands?
Not my first time buying Stoptech. I was hoping for EBC rotors but Stoptech were the only ones that had slotted rotors for the 2014 Honda Accord.
Was it easy to install? Any installation tips that will help others?
Just like any other rotors that use a single piston caliper. Very easy to install.
Once you've had a chance to use the product, did it meet your expectations?
Met my expectations and then some.
View on Haris's build
California prop 65 warningWARNING: Cancer and Reproductive Harm www.p65warnings.cs.gov

*Some manufacturer restrictions apply.

Benefits of adding this mod

How could you possibly enjoy all that tire shredding torque if you can’t stop? A good set of high performance pads, calipers, and rotors are arguably the most important upgrades you can make for a balanced, high performance build. Consistent performance across all operating conditions and reduced stopping distances result in significantly improved track times and a better daily-driver experience. Whatever your goal, we have all the brake parts you’ll need to build your dream ride (and make sure it stops).

shipping-worldwide-jpg

we ship worldwide!

Based in California with 3 warehouses across the country, we’re sending out shipments everyday of the week, even Saturdays. Because your next mod shouldn’t have to wait.

+ FREE GROUND SHIPPING ON U.S. ORDERS OVER $99
International shipping icon
Have a question? Ask an Expert!

Finding the best parts can be tricky

- but not to worry! Our team of experienced American Muscle, JDM, Euro, and off-road tuners are ready to answer your questions (as long as we’re not in the garage wrenching on our own builds).

chat-iconLive Chat
Ask our expert tuners anything!
call_iconCall Us
1 (800) 959-4304

Wheelwell wants to be the new online hub for car parts and accessories.

Wheelwell helps you organize all your stuff for your car, I’ve loaded all my cars on Wheelwell and you can see all the parts I’ve put in them and that may help you make a decision with your own build.

Matt Farah

Smoking Tire / The Drive

Thank you for all the help, really. You guys are awesome. This is all great info and I really appreciate everything you have done to help me with my build.

James M.

Ford Focus ST

Your customer service is wonderful. Thank you for taking care of this. My review will express all. Thank you!

Wallace R

Chevrolet Silverado 1500