#project

Top Posts

Tony Burnette4 days ago

#project #projectruck #chevy #c10 #silverado ttps://youtu.be/6zeiesPbUWE

Dan Connors11 days ago

DIY: How to Rebuild Subaru Brembos As most car enthusiasts know, when it comes to braking Brembo is the name in quality and stopping power. Many high performance cars now come from the factory equipped with these high end brake sets and while they perform extremely well for years on end and in harsh conditions, they do eventually need to be rebuilt or repainted. In this DIY I’m going to cover how I performed both services on all 4 calipers

Justin Andreotti132 days ago

The body work continues #nissan #240sx #s13 #coupe #jdm #project #dailydriven #bodywork #custom #restoration

Ashley Moeck139 days ago

#camaro #project #insidethebuild #79

Matt Heeley147 days ago

Thanks to my long-suffering wife, I was able to get some garage time on Father's Day to start building the runners for my manifold. I'm using 2" Schedule 40 pipe instead of tubing. If I were to use tubing I would probably use 1.5". If you are new to fab work, fun fact: tubing is measured on its inside diameter, pipe is measured on its outside diameter. My pipe wall thickness is .157" I believe, which when you

Ashley Moeck151 days ago

My babies 🙈 #camaro #mustang #mach1 #ladydriven #insidethebuild #project

Steven Cleary181 days ago

#project-baby

Sniffy Buttermilk185 days ago

After nearly seven years off the road, the Integra build resumes! New 15" steelies, General Altimax tires, radiator, and fan. #integra #sleeper #da9 #project #1991 #acura #acuraintegra

Justin Cavallucci257 days ago

So so close to being done! Last steps are the aem Methanol injection kit, wastegate screamer pipe, and changing out the spark plugs. Also a few stuff here and there... #ford #fordperformance #americanmuscle #weld #wheelwell #weldernation #testpipes #power #pypes #drive #fabrication #jba #v6 #bassani #muscle #mustangsofinstagram #cavalluccifabrications #turbo #project #car #projectcar #diy

Brendan Cole344 days ago

#widebodycrx #newhere #project

Justin Cavallucci353 days ago

Today I found some inspiration to work on my car in an unlikely way. I decided I wanted to clean the inside so I didn't feel like I was hopping into a piece of junk every time I got into it. I found out the true extent of how badly damaged the floor pans, carpets, and headliners are as they each disintegrated into tiny little bits as I cleaned them. I eventually stopped caring about maintaining it as it

Justin Cavallucci354 days ago

I want to know, if you could have any car to choose, which car would you want to restore from a really bad condition or build from stock. My choice is the 1968 coupe sitting in my driveway at the moment. The only difference I would wish for it is it being a fastback, but in the same condition or worse, they sell for 6x what I bought mine for. #project_car #mustang #carporn #weekender #project #car #ford

Dana Mills377 days ago

I'm so stoked to finally be able to see my progress. Thought I bit off more than I could than but I'm proud of myself for this. 

Tim Oliva378 days ago

Rear tow hook sorted... mostly. Drill a hose, bolt it down with a bit of lock tight on the threads. Bolting straight to frame so plenty tough enough for tugging.car

Tobias Thomsen778 days ago

Miss working on my Datsun projekt... #gottaStudie's #Datsun #B210

Dillon Vang384 days ago

Oh man...I hope this turns out okay. . . z

Loading more posts...
xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">Asset 4Asset 3Check marlCreated using Figma